Cable Rollers & Guides

Manhole Cable Roller Ref: 103-6-1 We offer from our standard range using two vertical and one horizontal steel rollers for taking the heaviest cabl...

Triple Corner Cable Roller Ref: 103-4-1 We offer from our standard range using two vertical and one horizontal steel rollers for taking the heavies...

Narrow Cable Roller Ref: 103-3-1 Designed for use in narrow trenches. Lightweight assembly suitable for cables up to 76mm dia. Zinc plated steel fr...

Triple Manhole Cable Roller Ref: 103-7-1 We offer from our standard range using two vertical and one horizontal steel rollers for taking the heavie...

CDJ Bridge Roller Ref: 103-1-1 This is our standard Bridge Roller being able to place same over a cable up to 90mm dia already laid in the trench. ...

Heavy Duty Cable Roller Ref: 103-2-1 We offer from our standard range a heavy duty assembly suitable for cables up to 125mm dia. Steel frame large ...

Steel Bellmouths c/w Guide Roller Ref: 117-2 In separable hinged halves to guide the cable through the duct to avoid damage to both the Cable or th...

Steel Bellmouths c/w Guide Roller Ref: 117-2 In separable hinged halves to guide the cable through the duct to avoid damage to both the Cable or th...

Angle Corner Cable Roller Ref: 103-8 Purpose designed for taking the heaviest cables round difficult corners and bends. Incorporates a vertical and...

Heavy Duty Suspension Roller Ref: 103-14-1 To take initial strain on the heaviest cable where they are lifted from the floor and onto cable trunkin...

The 90° cable guide roller is ideally suited for use on various edges to pull cables gently around corners with the least possible resistance. It c...

V Cable Roller Ref: 103-5-1 A guide roller for use in front of the drum which centralises the cable from the drum into the trench. Sealed roller be...

Draw Off Roller Ref: 103-12-1 To lead the cable directly from the drum into the trench. 75mm diameter steel tube roller on low friction sintered bu...

Steel Bellmouths c/w 4 Guide Roller Ref: 117-3 In separable hinged halves to guide the cable through the duct to avoid damage to both the Cable or ...

Skid Cable Roller Ref: 103-9-1 Purpose designed for taking the heaviest cables round difficult corners and bends. Incorporates a vertical and horiz...

Rope Guiding Roller for Ducts Ref: 117-4 Used to guide drawropes and cabling ropes out of manhole entrance and jointboxes to avoid damage to the ro...

Rope Guiding Roller for Ducts Ref: 117-4 Used to guide drawropes and cabling ropes out of manhole entrance and jointboxes to avoid damage to the ro...

The cable guide roller - shaft inside edge is ideally suited for mounting on the edge of a shaft or on steps to pull cables gently around corners w...

The cable guide roller - shaft is ideally suited for mounting in shafts to pull cables gently around corners with the least possible resistance. It...

The cable guide roller - chain is extremely versatile and can be used for pulling cables gently around corners with the least possible resistance. ...

Swivelling Edge Roller for Ducts Ref: 117-4 For protection of the rope on the rim and corner of the manhole. Unit swivels to the direction of the p...

Suspension Roller 103-13-1 To enable cables to be winched and suspended in high buildings prior to being positioned on gantries, beams etc.Zinc pla...

Skid Plate Trench Roller Ref: 103-11 Can be used with the Skid Roller as an alternative to the Corner Roller System. Note, you need to buy 2 x Skid...

Vertical Cable Roller Ref: 103-10 Vertical Cable Roller 103-10-2 Nine vertical steel rollers each running in roller bearings and mounted in a heavy...

Horizontal Cable Roller 103-10-1 Two horizontal rollers with quick release gate opening to allow easy entry and removal of cables up to 125mm diame...