CableitUK

11mm  Duct Rod on Reel / Cobra Duct Rod (Conduit Rod) 150m Ref: 102-4-2   High quality glass fibre reinforced helically wound epoxy rod giving good...

Steel Bellmouths c/w Guide Roller Ref: 117-2 In separable hinged halves to guide the cable through the duct to avoid damage to both the Cable or th...

11mm  Duct Rod on Reel / Cobra Duct Rod (Conduit Rod)   200m Ref: 102-4-3 High quality glass fibre reinforced helically wound epoxy rod giving goo...

4mm, 4.5mm and 6mm Duct Rods accessory pack

4mm, 4.5mm and 6mm Duct Rods Repair Kits (End and Glue)

Duct Rod  (Conduit Rod) 40m Ref: 102-1-1 High quality glass fibre reinforced helically wound epoxy rod giving good adhesion properties for the oute...

750kg Drum Tip Stand Ref: 100-1 For ease of lifting and payout of cable All steel welded tubular frame Maximum Drum Diameter:  1750mm Maximum ...

Duct Rod  - Swivel Pulling Eye Ref: 102-8 Swivel Pulling Eye - Used for attaching draw wire to the end of the rod or used as a leader. These are su...

Ref: 122-1-1 Features: Material: Nylon+PC Most Robust Wheel Available Carry Bag Included Reset in Handle Trigger Brake in Handle Heavy Duty Oval S...

Ref: 122-1-4 Features: Material: pc+ab+pom Double color thickened handle Most Robust Wheel Double folded ****INCLUDES CARRY BAG**** Spec Meas...

Angle Corner Cable Roller Ref: 103-8 Purpose designed for taking the heaviest cables round difficult corners and bends. Incorporates a vertical and...

Cable Drum Rotators (Pair) Max Payload: 1500Kg  Heavy duty all steel welded, fitted with one fixed and one adjustable diablo shaped steel roller wi...

Cable Drum Rotators - Max Payload: 200kgs  Small well built Cable Drum Rotators, with carry handle, 200kg working load for small cable drums. Spec ...

Cable or Rope Protecting Bend for Ducts Use for guiding cable or rope through bends to avoid damage to the cable or rope. Zinc Plate Finish Spec ...

Cable Protecting Bend With Angled Base for Ducts  To fit the rim corners of the manhole. Unit swivels to the direction of the pull. Zinc Plate Finish

Cable Protecting Bend with Handle & Stop for Ducts Ref: 117-4 Used for guiding cable or rope through bends to avoid damage to the cable or rope...

Cable Protecting Bend With Snout for Ducts Ref: 117-4 For Securing inside 89 or 100mm Ducts.. Zinc Plate Finish

Duct Brushes  Cylindrical Brush with Polypropylene Centres drilled and fitted with threaded steel Rod, Steel end caps and pulling eye each end. Ove...

Double Eye Cable Pulling Sock's  Sometimes called Cable Socks or Cable Grips.An efficient method of supporting or pulling cables.Manufactured from ...

Draw Off Roller  To lead the cable directly from the drum into the trench. 75mm diameter steel tube roller on low friction sintered bushes. All mou...

6mm blue polypropylene rope approximate length of 500m and 220m, approximate breaking strain of 550kg. ** 220m supplied as coil ** 500m Supplied on...

Duct Rod  - (Male) replacement tip Ref: 102-8 Replacement Tips for our range of duct rods with screw end. ****Splice connectors are to be use with ...

Duct Rod  - 6MM STAINLESS HEXAGON DEE SHACKLE (FOR DUCT RODS)  Dee or U shackle for use with duct rod guided tips when a larger pulling eye is requ...